Lifegard QL-80 UV Sterilizer 2 " Slip 115VAC (R177300C)

Lifegard QL-80 UV Sterilizer 2 " Slip 115VAC

Lifegard Aquatics

MSRP: $701.33

$571.85

(You save $129.48 )

(1 review) Write a Review

SKU:: R177300C
Availability:: Ships From Manufacturer allow 5 to 7 days
Weight:: 15.00 LBS
Width:: 24.00 (in)
Height:: 40.00 (in)
Depth:: 16.00 (in)
Minimum Purchase:: 1 unit
Shipping:: Calculated at Checkout

Overview
Other Details
Reviews

Product Description

Ultraviolet Sterilizer Modules QL Series. The radiation from ultraviolet light at 2537 angstroms provided inside the Lifegard Ultraviolet Sterilizer exerts a lethal effect on micro-organisms. UV light alters genetic material within the cells, which interrupts respiration. UV light, when used properly, is extremely beneficial in destroying disease causing pathogens as they pass through the unit. UV sterilization is an effective method of disease control. Four major factors affect the percent kill of free-floating micro- organisms by UV radiation. (l) Size of organisms. (2) Radiation level. (3) The extent to which UV rays penetrate the water and (4) Contact time in which the micro-organism is exposed to the UV radiation. Pure hard quartz material in the bulb dramatically increases UV output compared to other conventional bulbs of equal wattage. Pure quartz material resists solarization and improves the longevity of the bulb. Unique test tube style pure hard quartz sleeve isolates the bulb from water contact preventing thermal shock, broken glass and mercury contamination of the aquarium. This quartz sleeve isolates the bulb to provide an optimal bulb operating temperature of 100 degree F(38 degree C). This higher bulb temperature increases UV output 35% over conventional units without sleeves. Bulb changing is the easiest in the industry. Simply slide the old bulb out and slide the new bulb in. No need to shut down the filter system or turn off the pump. Bulb and ballast connect together with a single 4 pin connector. UV radiation levels can be increased by slowing down the flow rate or increasing the total wattage in the system. UV sterilizers are available from 15 watts up to 240 watts. Tandem mounting will provide proper wattage for any installation requirement. UV sterilization is most effective when used as the final stage of the Lifegard filtration system. It must be understood that micro-organisms reproduce exponentially. The goal is to reduce the micro-organism population to an acceptable level. In certain instances, the wattage may be adequate to eliminate the pathogens flowing through the Sterilizer but the flow rate is too slow to keep up with the total micro-organism population in the aquarium system. In those cases, the flow rate and total wattage must be increased

Part No.	Model	Watts	Inlet Port	Outlet Port	Height	Maint Clearance	Max GPH
Lifegard Ultraviolet Sterilizer Modules 115 Volt / 60 Hz
R177080	QL-15	15	3/4″/1″ FPT	3/4″/1″FPT	17″	27″	Up to 240
R177250	QL-25	25	3/4″/1″ FPT	3/4″/1″FPT	26 3/4″	42 3/4″	Up to 760
R177300	QL-40	40	3/4″/1″FPT	3/4″/1″ FPT	34 1/2″	64 1/2″	Up to 1500
R177300C	QL-80	80	2″ Slip	2″ Slip	45 1/4″	75 1/4″	Up to 3000
R177300B	QL-120	120	2″ Slip	2″ Slip	45 1/4″	75 1/4″	Up to 4500
R1777304A	QL-160	160	2″ Slip	2″ Slip	45 1/4″	75 1/4″	Up to 6000
R177305A	QL-240	240	2″ Slip	2″ Slip	45 1/4″	75 1/4″	Up to 9000

Splash Boot creates water resistant seal around electrical connection
Unique 4-pin connector design for easy bulb replacement without shutting down system
UV Bulb of highest quality pure hard quartz material allows maximum UV transmission and longer bulb life. End cap wire design drops bulb further into unit for maximum output and keeps heat away from sealing area
15, 25 or 40 Watt UL Listed Ballast (230V, 50Hz Ballast available
Compression Coupling and gasket seals quartz sleeve to cap
Test Tube style quartz sleeve isolates UV bulb from water contact allowing it to operate at the optimum bulb temperature for maximum UV output. Highest quality pure hard quartz material allows maximum UV transmission
Replaceable Internal Overflow Pipe automatically vents air from chamber and directs 100% of the water flow past the UV light
Sleeve Guide guides quartz sleeve into proper position for accurate assembly
Replaceable Inner protective Sleeve protects outer housing from long term UV damage. Acts as an internal reflector maximizing UV efficiency
Modular Construction allows simple connection to any Lifegard Modular Filter System or outside cannister filter
Solid Cap features Clear View Port to allow visible light (no UV) to pass through and indicate bulb is operating

Other Details

1 Year Limited Warranty, 60 Days UV lamp

Product Videos

Custom Field

Product Reviews

Write a Review

1 Review Hide Reviews Show Reviews

5
Uv sterilizer

Posted by Jake on 29th Mar 2023

Rich was very helpful. Will be back in the future